Running Samples; Printing A Report; Turning Off The Instrument; Using Standby Mode - Agilent Technologies 700 Series User Manual

Operation

Running Samples

For detailed information and tutorials on how to run samples, which includes
setting up the sequence and sequence parameters, see the ICP Expert II Help:
1 Click Start > All Apps > ICP Expert II > Help.
2 Expand How to and then click Run an analysis.

Printing a Report

Once your analysis is complete, you can preview or print a report of your results or
export your results. See the ICP Expert II Help for detailed instructions:
1 Click Start > All Apps > ICP Expert II > Help.
2 Expand How to and then click Report your results.

Turning Off the Instrument

There are two modes of turning off your ICP-OES. For day-to-day use, it is
recommended that the instrument be set to Standby mode (which keeps the
polychromator thermostating system and purge systems operational). When the
ICP-OES is not going to be in use for prolonged periods, the Shutdown mode may
be used (which turns off all purging as well as the polychromator thermostating
system).

Using Standby Mode

To set the instrument to Standby mode:
1 Rinse the spraychamber by aspirating water for a few minutes.
NOTE When running organic samples, it is recommended that the spraychamber be
cleaned and dried thoroughly between analyses.
32 Agilent 700 Series ICP Optical Emission Spectrometers User's Guide