Table of Contents
Advertisement
The tuning step value can be changed as follows:
1.
Press [MENU], then press [ENT].
2.
Use [▶] to select [STEP], then press [ENT].
3.
Use the arrow keys [◀] or [▶] to select the desired step and press [ENT] to validate the
setting.
5.9.
STEP-ADJUST
This function is useful when the array of desired receiver frequencies is not compatible with
the default step frequency. Step-adjust allows setting the frequency steps accordingly.
The following example describes a situation when a 20kHz frequency step needs to be ad-
justed to 10kHz steps.
439.00
20kHz step
439.01
The step-adjust value can be set as follows:
Press [MENU], then press [ENT].
Use [▶] to select [STEP ADJ], then press [ENT].
Note that there are 3 pages of values from
0.05kHz up to 250kHz. Select 0Hz to disable
the function.
Note that there are 3 pages of values from 10Hz
←
up to 500kHz.
439.02
439.04
439.03
10kHz step-adjust
439.06
439.05
439.07
23
439.08
439.10
439.09
Advertisement
Table of Contents
