Table of Contents
Advertisement
D-STAR call sign is not
displayed.
From, to, rep1, rep2
appears even though
it's
not
a
D-STAR
signal.
Boot up is hanging,
does not boot normally
to VFO screen.
LCD display seems fro-
zen.
Header of the transmis-
sion has not been re-
ceived. Especially dur-
ing SCAN and SEARCH,
hitting a signal in the
middle
of
transmission is likely.
Noise was mistaken for
a digital signal.
System data not loaded
correctly.
System data problem
58
・ Wait for the next transmission
(header) to be received and de-
coded.
・If cause is unstable signal, try a
better location or larger antenna.
a
This is not a malfunction. Try a new
location with better signal to noise
ratio, or a larger antenna.
Remove all power sources, wait 1
minute, reinsert the battery pack
and power on again.
Reboot the receiver and do a sys-
tem reset.
Advertisement
Table of Contents
