Table of Contents
Advertisement
[VFO]
FM15
[D]
2
YAES
[Au]
20k
VFO-A XXXX.XXX XX
VFO-B XXXX.XXX XX
-------------------
00-00 XXXX.XXX XX
3
BANK.T (bank title)
CH.T (channel title)
00 XXXX.XXX XX
BANK.T (bank title)
UPPER SIDE→
LOWER SIDE→
Memory channel readout mode
Operation mode
[VFO]: VFO
[MEM]: Memory channel readout
[SCN]: Scan
[SER]: Search
Demodulation modes (IF bandwidth in kHz or Hz):
FM100, FM30, FM15, FM6 (kHz)
AM15, AM8, AM5.5, AM3.8 (kHz)
USB2.6, USB1.8, LSB2.6, LSB1.8 (kHz)
CW500, CW200 (Hz)
IF bandwidths for digital modes: FM30, FM15, FM6 (kHz)
Digital demodulation is activated.
Digital mode which has been set manually, or which has been
automatically detected by the receiver:
YAES: YAESU (C4FM)
DSTR: D-STAR
DMR: DMR (Tier 1 / Tier 2 / MOTOTRBO)
D-CR: Japanese D-CR & NXDN (6.25k)
dPMR: dPMR (446 Tier 1)
ALIN: ALINCO (EJ47U)
P-25: APCO25 (Phase 1)
T-DM: TETRA (Direct mode, mobile to mobile)
Auto-detection of digital modes is activated. (Except Tetra)
Frequency step in kHz.
Step-adjust values (when activated) are shown in Section 5.8
Receive frequency (In MHz over 3MHz and in kHz below
3MHz. The currently received VFO is shown on the upper
line.
For memory channel readout and scan modes, the bank and
channel numbers are displayed on the upper line. The bank
and channel titles are on the lower line.
For search mode, the bank number is displayed on the upper
line. The bank title is on the lower line.
10
----------------------
Search mode
Advertisement
Table of Contents
