Table of Contents
Advertisement
3.
Use [▶] to select any of the following categories in
order to perform data COPY, MOVE or ERASE data:
SEARCH BANK: For an entire search bank.
SEARCH GRP:
4.
Press [ENT] and rotate the dial knob to choose:
COPY: To copy data
MOVE: To move data (the original entry will be
deleted)
DEL:
To delete data
5.
Press [ENT] to enter the data input screen.
6.
Using the dial knob, select the data to be erased, or the
data to be copied or moved to a target location and
move to the next selection using the [▶] key.
7.
Once all the data is entered, initiate the copy/move/
erase procedure by selecting: [XXX EXEC] and press
[ENT].
◯ 「WRITING MEMORY...」 will be displayed for a short time
until the procedure is completed.
How to erase pass frequencies:
1.
Press [MENU].
2.
Use [▶] to select [EDIT], then press [ENT].
3.
Use [▶] to select [PASS FREQ] and then press [ENT]
twice.
4.
Use the dial knob to select the bank number, for which
the pass frequencies are to be erased.
5.
Now choose to erase just one pass frequency, or all
pass frequencies for this bank number.
Just one:
Use [▶] to select line 2, [F.NO], then rotate the dial knob
to select the memory channel number of the unwanted
pass frequency.
Use [▶] to select line 9, [DEL EXEC], then press [ENT].
All:
Use [▶] to select line 4, [DEL 1PF/ALL] and then rotate the dial knob to select [ALL].
Use [▶] to select line 9, [DEL EXEC] and then press [ENT].
◯「WRITING MEMORY...」will be displayed for a short time while the procedure completes.
For a search group.
41
Advertisement
Table of Contents
