5-10 Onboard Indicators - Supermicro 5038AD-I User Manual

5-10 Onboard Indicators

LAN LEDs
One LAN port is located on the I/O
backpanel of the motherboard. This
Ethernet LAN port has two LEDs
(Light Emitting Diode). The yellow LED
indicates activity, while the Link LED
may be green, amber, or off to indicate
the speed of the connections. See the
tables at right for more information.
BMC Heartbeat
LEDM1 is a status indicator for the
onboard Baseboard Management
Controller (BMC). See the table on
the right for status display defi nitions.
Note: this feature is for the C7X99-
OCE-F only.
Power LED
An Onboard Power LED is located
at LED1 on the motherboard. When
LED1 is on, the AC power cable is
connected. Make sure to disconnect
the power cable before removing or
installing any component. See the
layout below for the LED location.
Chapter 5: Advanced Motherboard Setup
Link Speed
LED
LAN Port Activity LED (Left)
Color Status
Orange Flashing
1Gbps LAN Link
LED Settings
(For X##xxx-MB)
Color
Off
Green
Amber
BMC Heartbeat LED
LED Status (LEDM1)
Status
Off
On, blinking
Power LED Indicator
LED Status (LED1)
Status Defi nition
Off System Off
On System on, or
System off and PWR
Cable Connected
5-27
GLAN LED
Activity
LED
LED State
Defi nition
Active
Defi nition
No Connection,
10 Mbps
100 Mbps
1 Gbps
Defi nition
System Off
BMC running normal