Onboard Controllers/Ports; Other Features; Recovery From Ac Power Loss - Supermicro 5038AD-I User Manual

Onboard Controllers/Ports

Both the motherboard and chassis include the following I/O ports:
•
Eight (8) USB 3.0 ports (six (6) rear I/O panel and two (2) front panel)
•
Two (2) RJ-45 rear I/O panel connector
•
One (1) Serial port header (COM1) on the motherboard
•
One (1) rear I/O panel High Defi nition Audio 7.1 channel connector (supported
by Realtek ALC1150)
•
One (1) front panel Audio Header
•
One (1) S/PDIF out on the rear side of the chassis

Other Features

Other onboard features of the motherboard include:
•
ACPI/ASPM Power Management
•
Main Switch Override Mechanism
•
Internal/External Modem Ring-On
•
Power-on mode for AC power recovery
•
Onboard monitors: CPU core, +3.3V, +5V, +/- 12V, +3.3V Stby, +5V Stby, VBAT,
HT, Memory PCH Temperature, System Temperature, and CPU Temperature
•
CPU 6+1 phase switching voltage regulator
•
CPU/System overheat LED and control
•
CPU Thermal Trip and Monitor support
•
Fan status monitoring with fi rmware 4-pin fan low-noise speed control
•
PECI (Platform Environment Confi guration Interface) 2.0 support
•
System resource alert via SuperDoctor® III, NMI
•
BIOS fl ash upgrade utility
•
ROHS 6/6 (Full Compliance, Lead Free)

Recovery from AC Power Loss

Basic I/O System (BIOS) provides a setting for you to determine how the system will
respond when AC power is lost and then restored to the system. You can choose
for the system to remain powered off, (in which case you must press the power
switch to turn it back on), or for it to automatically return to a power-on state. See
the Advanced BIOS Setup section to change this setting. The default setting is
Last State.
1-3
Chapter 1: Introduction