Supermicro SuperServer 5039MS-H12TRF User Manual
  1. Manuals
  2. Brands
  3. Supermicro Manuals
  4. Server
  5. SuperServer 5039MS-H12TRF
  6. User manual

Supermicro SuperServer 5039MS-H12TRF User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SuperServer
®
5039MS-H12TRF
USER'S MANUAL
Revision 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SuperServer 5039MS-H12TRF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Supermicro SuperServer 5039MS-H12TRF

Summary of Contents for Supermicro SuperServer 5039MS-H12TRF

  • Page 1 SuperServer ® 5039MS-H12TRF USER’S MANUAL Revision 1.0...
  • Page 2 State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.

  • Page 3: About This Manual

    If you have any questions, please contact our support team at: support@supermicro.com This manual may be periodically updated without notice. Please check the Supermicro website for possible updates to the manual revision level. Warnings Special attention should be given to the following symbols used in this manual.

  • Page 4: Table Of Contents

    SuperServer 5039MS-H12TRF User's Manual Contents Chapter 1 Introduction 1.1 Overview ..........................7 1.2 Unpacking the System ......................7 1.3 System Features ........................8 1.4 Chassis Features .........................9 Power Button/LED .......................9 Front Features ........................10 Rear Features ........................11 1.5 Motherboard Layout ......................12 Motherboard Jumpers, Connectors, and LEDs ..............13 Chapter 2 Installation in a Rack 2.1 Preparing for Setup ......................15...
  • Page 5 Preface 3.4 Chassis Components ......................32 Hard Drives ........................32 System Cooling .........................34 Corresponding Nodes and Fans ...................34 Replacing Fans ......................35 Air Shroud ........................36 Power Supply ........................37 Chapter 4 Motherboard Connections 4.1 Node Front Panel Controls....................38 4.2 Headers and Connectors ....................38 4.3 Ports ...........................40 4.4 Jumpers ..........................41 4.5 LED Indicators ........................43 Chapter 5 Software...

  • Page 6: Contacting Supermicro

    SuperServer 5039MS-H12TRF User's Manual SuperServer 5039MS-H12TRF User's Manual Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Website: www.supermicro.com...

  • Page 7: Chapter 1 Introduction

    Chapter 1 Introduction 1.1 Overview The SuperServer 5039MS-H12TRF is a MicroCloud server system in the SC939HS-R2K04BP chassis, featuring twelve separate computing nodes each containing an X11SSE-F motherboard. In additon to the motherboards and chassis, several included parts are listed below.

  • Page 8: System Features

    SuperServer 5039MS-H12TRF User's Manual 1.3 System Features The following table provides you with an overview of the main features of the 5039MS-H12TRF. Refer to Appendix C for additional specifications. System Features Motherboard X11SSE-F Chassis SC939HS-R2K04BP Intel Xeon E3-1200 v5 (Skylake-S)

  • Page 9: Chassis Features

    Chapter 1: Introduction 1.4 Chassis Features Power Button/LED The main power button on each of the nodes functions as both an on/off switch and as a status LED. Pressing the button will alternately power on or remove power from the node. See the table below for the LED indications.

  • Page 10: Front Features

    SuperServer 5039MS-H12TRF User's Manual Front Features The SC939HS-R2K04BP is a 3U chassis holding 12 discreet computing nodes. The chassis front offers access to the dual power modules. It also includes two dedicated LAN ports to provide IPMI management capabilitites for all nodes.

  • Page 11: Rear Features

    Chapter 1: Introduction Rear Features The illustration below shows the features included on the rear of the chassis. Power Plugs (2) Exhaust Fans (4) Figure 1-4. Chassis Rear View...

  • Page 12: Motherboard Layout

    SuperServer 5039MS-H12TRF User's Manual 1.5 Motherboard Layout Below is a layout of the X11SSE-F with jumper, connector and LED locations shown. See the table on the following page for descriptions. For detailed descriptions, pinout information and jumper settings, refer to Chapter 4.

  • Page 13: Motherboard Jumpers, Connectors, And Leds

    Chapter 1: Introduction Motherboard Jumpers, Connectors, and LEDs Jumper Description Default Setting JBT1 CMOS Clear Open (Normal) JPG1 VGA Enable/Disable Pins 1-2 (Enabled) JPME1 ME Recovery Pins 1-2 (Normal) JPME2 ME Manufacturing Mode Pins 1-2 (Normal) JPO1 Power Fail Override Pins 2-3 (Disabled) JWD1 Watch Dog...
  • Page 14 SuperServer 5039MS-H12TRF User's Manual SVID PCIe3.0_x8 IMVP8 IMVP8 PCIe x8 MLP SLOT 8.0GT/s LGA1151 DDR4 (CHA) DIMMA1 2133/1866/1600MHz DIMMA2 SATA-III 6Gb/s (Socket-H4) I-SATA[2]/NVMe1 PCIe3.0_x8 PCIe3.0 x4 DDR4 (CHB) DIMMB1 8.0GT/s 8.0GT/s 2133/1866/1600MHz DIMMB2 SATA-III 6Gb/s I-SATA[3]/NVMe2 PCIe3.0 x4 x4 DMI 8.0GT/s...

  • Page 15: Chapter 2 Installation In A Rack

    Chapter 2 Installation in a Rack Chapter 2 Installation in a Rack This chapter provides advice and instructions for mounting your system in a rack. 2.1 Preparing for Setup The box in which the system was shipped should include the hardware needed to install it into the rack.

  • Page 16: Server Precautions

    SuperServer 5039MS-H12TRF User's Manual Server Precautions • Review the electrical and general safety precautions in Chapter 3. • Determine the placement of each component in the rack before you install the rails. • Install the heaviest server components at the bottom of the rack first and then work your way up.

  • Page 17: Reliable Ground

    Chapter 2 Installation in a Rack Reliable Ground A reliable ground must be maintained at all times. To ensure this, the rack itself should be grounded. Particular attention should be given to power supply connections other than the direct connections to the branch circuit (i.e. the use of power strips, etc.). To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable.

  • Page 18: Installing The Rails

    SuperServer 5039MS-H12TRF User's Manual 2.2 Installing the Rails There are a variety of rack units on the market, which may require a slightly different assembly procedure. The following is a basic guideline for installing the system into a rack. Also refer to the installation instructions that came with the rack.

  • Page 19: Chapter 3 Maintenance And Component Installation

    Chapter 3: Maintenance and Component Installation Chapter 3 Maintenance and Component Installation This chapter provides instructions on installing and replacing main system components. To prevent compatibility issues, only use components that match the specifications and/or part numbers given. Installation or replacement of most components require that power first be removed from the system.

  • Page 20: Accessing The System

    SuperServer 5039MS-H12TRF User's Manual 3.2 Accessing the System Top Cover A portion of the chassis top is removable to allow access to the system fans and backplane. Removing the Top Cover 1. Remove power from the system as described in Section 3.1.

  • Page 21: Removing And Installing Motherboard Nodes

    Chapter 3: Maintenance and Component Installation Removing and Installing Motherboard Nodes The system comes features twelve removable nodes. Each node contains an individual motherboard and hard drives mounted on a sled, which allows it to easily be installed and removed from the chassis. Release Tab Handle Figure 3-2.

  • Page 22: Connecting To A Node

    SuperServer 5039MS-H12TRF User's Manual Connecting to a Node USB, COM, and serial port capabilties can be added to any node through the KVM port on the front. Plug in the adapter (dongle). Figure 3-3. Adapter to Provide USB, COM, and Serial Ports...

  • Page 23: Motherboard Components

    • Refer to the Supermicro website for updates on CPU support. Installing the Processor 1. Remove power from the system as described in Section 3.1.
  • Page 24 SuperServer 5039MS-H12TRF User's Manual 3. Lift open the load plate. Load Plate Open Socket Key Processor Notches Figure 3-3. Placing the Processor into the Socket 4. Use your thumb and your index finger to hold the edges of the processor. Do not touch the socket contacts or the bottom of the processor.
  • Page 25 Chapter 3: Maintenance and Component Installation 6. Gently close the load plate onto the processor. The plastic protective cover on the load plate will pop off. Save the cover to protect the socket if the processor is ever removed. 7. Making sure the slot in the load plate slides under the retaining post, close and latch the locking lever.
  • Page 26 SuperServer 5039MS-H12TRF User's Manual Installing a Heatsink A passive type heatsink is used on the X11SSE-F motherboard. Note: Do not apply any thermal grease to the heatsink or the CPU; the required amount has already been applied. 1. Place the heatsink on top of the CPU so that the four mounting holes are aligned with those on the heatsink retention mechanism.

  • Page 27: Memory Installation

    (128-bit) memory, which is faster than non-interleaved (64-bit) memory. Check the Supermicro website for possible updates to memory support. DIMM Module Population Configuration For optimal memory performance, follow the table below when populating memory.

  • Page 28: Dimm Module Population Sequence

    SuperServer 5039MS-H12TRF User's Manual Memory Module Population Max Memory 4GB DRAM 8GB DRAM Possible Technology Technology Single Rank 16GB 32GB UDIMM (4x 4GB DIMMs) (4x 8GB DIMMs) Dual Rank 32GB 64GB UDIMMs (4x 8GB DIMMs) (4x 16GB DIMMs) DIMM Module Population Sequence When installing memory modules, the DIMM slots must be populated in the following order: DIMMB2, DIMMA2, then DIMMB1, DIMMA1.

  • Page 29: Install Procedure

    Caution: Exercise extreme caution when installing or removing memory modules to prevent damage to the DIMMs or slots. Note: Visit the product page on the Supermicro website for possible updates to memory support (www.supermicro.com). Removal Procedure To remove a DIMM module, unlock the release tabs then pull the module from the slot.

  • Page 30: Expansion Module

    SuperServer 5039MS-H12TRF User's Manual Expansion Module Each of the twelve nodes includes a single MicroLP expansion module providing two LAN connections. Currently, there are four supported for the 5039MS-H12TRF system. Two LAN ports (standard), AOM-CGP-i2M Two QSFP + USB ports (optional), AOM-CIBF-M1M...

  • Page 31: Motherboard Battery

    Chapter 3: Maintenance and Component Installation Motherboard Battery The motherboard uses non-volatile memory to retain system information when system power is removed. This memory is powered by a lithium battery residing on the motherboard. Replacing the Battery 1. Remove power from the system as described in section 3.1 and remove the node from the chassis.

  • Page 32: Chassis Components

    SuperServer 5039MS-H12TRF User's Manual 3.4 Chassis Components Hard Drives The hard drives are installed directly to the node tray. For this reason, hard drives are not hot-swappable as the tray must be removed from the system. It supports two 3.5", four 2.5", or a combination of one 3.5"...
  • Page 33 Chapter 3: Maintenance and Component Installation Figure 3-7. Installing 2.5" HDDs Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers. For information on recommended HDDs, visit the Supermicro Web site at http://www. supermicro.com/products/nfo/storage.cfm.

  • Page 34: System Cooling

    SuperServer 5039MS-H12TRF User's Manual System Cooling Corresponding Nodes and Fans The 5039MS-H12TRF contains twelve individual motherboards contained in separate nodes. Three nodes each share a common fan (see figure below). Cooling Zone 1 Fan 1 Fan 2 Fan 3 Fan 4 Cooling Zone 2 Figure 3-8.

  • Page 35: Replacing Fans

    Chapter 3: Maintenance and Component Installation Replacing Fans Four 9-cm fans circulate air through the chassis to lower the internal temperature. These fans are designed to be easily changed, with no tools required and no need to remove any other parts inside the chassis. Replacing a Fan 1.

  • Page 36: Air Shroud

    SuperServer 5039MS-H12TRF User's Manual Air Shroud The air shroud is used to concentrate airflow to maximize fan efficiency. The air shroud does not require screws to set up. Installing the Air Shroud 1. Remove the node from the chassis onto a flat, non-conductive surface..

  • Page 37: Power Supply

    The chassis features redundant power supplies. They are hot-swappable, meaning they can be changed without powering down the system. New units can be ordered directly from Supermicro or authorized distributors. These power supplies are auto-switching capable. This feature enables them to automatically sense the input voltage and operate at a 100-120v or 180-240v.

  • Page 38: Chapter 4 Motherboard Connections

    SATA 3.0 receptacle connectors at I-SATA0 and I-SATA1 for 3.5" hard drive connection. Note 1: I-SATA6 is a Supermicro SuperDOM.This is a yellow SATA DOM connector with power pins built in and do not require separate external power cables. This connector is backward-compatible with non-Supermicro SATADOMs that require an external power supply.
  • Page 39 Chapter 4: Motherboard Connections TPM/Port 80 Header A Trusted Platform Module (TPM)/Port 80 header is located at JTPM1 to provide TPM support and a Port 80 connection. Use this header to enhance system performance and data security. Refer to the table below for pin definitions. Trusted Platform Module Header Pin Definitions Pin#...

  • Page 40: Ports

    SuperServer 5039MS-H12TRF User's Manual 4.3 Ports KVM/VGA Connector JKVM1 supports KVM/VGA (UART) connections on the I/O panel to provide console redirection support or remote networking interface. Using the adapter it provides two USB ports (USB0/1), a COM port and a serial port.

  • Page 41: Jumpers

    Chapter 4: Motherboard Connections 4.4 Jumpers Explanation of Jumpers To modify the operation of the motherboard, jumpers are used to choose between optional settings. Jumpers create shorts between two pins to change the function associated with it. Pin 1 is identified with a square solder pad on the printed circuit board. See the motherboard layout page for jumper locations.
  • Page 42 SuperServer 5039MS-H12TRF User's Manual VGA Enable/Disable JPG1 allows you to enable or disable the VGA port using the onboard graphics controller. The default setting is Enabled. VGA Enable/Disable Jumper Settings Jumper Setting Definition Pins 1-2 Enabled Pins 2-3 Disabled Watch Dog JWD1 controls the Watch Dog function.

  • Page 43: Led Indicators

    Chapter 4: Motherboard Connections Power Fail Override JPO1 is the power-failure override jumper. Close pin 1 and pin 2 of this jumper to override the power operations policy set by the manufacturer, and allow the remaining functional power supply to run at full capacity instead of operating at normal “power-safe” state as recommended by the manufacturer in the event of a power supply failure.

  • Page 44: Chapter 5 Software

    You must first configure RAID settings (if using RAID) before you install the Windows OS and the software drivers. To configure RAID settings, please refer to the RAID Configuration User Guides posted on our website at www.supermicro.com/support/manuals. Installing the Windows OS for a RAID System 1.

  • Page 45: Driver Installation

    Chapter 5: Software 5.2 Driver Installation The Supermicro FTP site contains drivers and utilities for your system at ftp://ftp.supermicro. com. Some of these must be installed, such as the chipset driver. After accessing the FTP site, go into the CDR_Images directory and locate the ISO file for your motherboard.

  • Page 46: Superdoctor ® 5

    5.3 SuperDoctor ® The Supermicro SuperDoctor 5 is a program that functions in a command-line or web-based interface for Windows and Linux operating systems. The program monitors such system health information as CPU temperature, system voltages, system power consumption, fan speed, and provides alerts via email or Simple Network Management Protocol (SNMP).

  • Page 47: Chapter 6 Bios

    Chapter 6: BIOS Chapter 6 BIOS 6.1 Introduction This chapter describes the AMIBIOS Setup utility for the X11SSE-F motherboard. The BIOS is stored in a flash chip and can be easily upgraded using a floppy disk-based program. Note: Due to periodic changes to the BIOS, some settings may have been added or deleted and might not yet be recorded in this manual.

  • Page 48: Main Menu

    SuperServer 5039MS-H12TRF User's Manual 6.2 Main Menu When you first enter AMI BIOS Setup Utility, you see the Main Menu screen.You can always return to the Main Menu by selecting the Main tab on the top of the screen with the arrow keys.

  • Page 49: Advanced Setup Configurations

    Chapter 6: BIOS Memory Information Total Memory This item displays the total size of memory available in the system. Memory Speed This item displays the memory speed. 6.3 Advanced Setup Configurations Caution: Take caution when changing the Advanced settings. An incorrect value, a very high DRAM frequency, or an incorrect DRAM timing setting may make the system unstable.

  • Page 50: Power Configuration

    SuperServer 5039MS-H12TRF User's Manual AddOn ROM Display Mode Use this feature to set the display mode for the Option ROM. Select Keep Current to display the current AddOn ROM setting. Select Force BIOS to use the Option ROM display set by the system BIOS.

  • Page 51: Cpu Configuration

    Chapter 6: BIOS Restore on AC Power Loss Use this feature to set the power state after a power outage. Select Stay-Off for the system power to remain off after a power loss. Select Power-On for the system power to be turned on after a power loss. Select Last State to allow the system to resume its last power state before a power loss.
  • Page 52 SuperServer 5039MS-H12TRF User's Manual Hyper-threading (Available when supported by the CPU) Select Enabled to support Intel Hyper-threading Technology to enhance CPU performance. The options are Enabled and Disabled. Active Processor Cores This feature determines how many CPU cores will be activated for each CPU. When all is selected, all cores in the CPU will be activated.
  • Page 53 Chapter 6: BIOS Turbo Mode Select Enabled for processor cores to run faster than the frequency specified by the manufacturer. The options are Disabled and Enabled. Package Power Limit MSR Lock Select Enabled to lock the package power limit for the model specific registers. The options are Disabled and Enabled.

  • Page 54: Chipset Configuration

    SuperServer 5039MS-H12TRF User's Manual C-State Auto Demotion Use this feature to prevent unnecessary excursions into the C-states to improve latency. The options are Disabled, C1, C3, and C1 and C3. C-State Un-Demotion This feature allows the user to enable or disable the un-demotion of C-State. The options are Disabled, C1, C3, and C1 and C3.
  • Page 55 Chapter 6: BIOS • SA PCIe Code Version • VT-d VT-d Select Enabled to enable Intel Virtualization Technology support for Direct I/O VT-d by reporting the I/O device assignments to VMM through the DMAR ACPI Tables. This feature offers fully-protected I/O resource-sharing across the Intel platforms, providing the user with greater reliability, security and availability in networking and data-sharing.
  • Page 56 SuperServer 5039MS-H12TRF User's Manual DVMT Pre-Allocated Dynamic Video Memory Technology (DVMT) allows dynamic allocation of system memory to be used for video devices to ensure best use of available system memory based on the DVMT 5.0 platform. The options are 32M, 64M, 96M, 128M, 160M, 192M, 224M, 256M, 288M, 320M, 352M, 384M, 416M, 448M, 480M, 512M, 1024M, 1536M, 2048M, 4M, 8M, 12M, 20M, 24M, 28M, 32M/F7, 36M, 40M, 44M, 48M, 52M, 56M, and 60M.

  • Page 57: Memory Configuration

    Chapter 6: BIOS DMI De-Emphasis Control Use this feature to configure the De-emphasis control on DMI. The options are -6dB and -3.5dB. PEG Port Configuration PEG 0:1:0 PEG0 Enable Root Port Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port specified by the user.
  • Page 58 SuperServer 5039MS-H12TRF User's Manual • DIMMA1 • DIMMA2 • DIMMB1 • DIMMB2 • Memory Timings (tCL-tRCD-tRP-tRAS) Maximum Memory Frequency Use this feature to set the maximum memory frequency for onboard memory modules. The options are Auto, 1067, 1200, 1333, 1400, 1600, 1800, 1867, 2000, 2133, 2200, and 2400.

  • Page 59: Sata Configuration

    Chapter 6: BIOS • Intel PCH SKU Name • Intel PCH Rev ID Port 61h bit-4 Emulation Select Enabled to enable the emulation of Port 61h bit-4 toggling in SMM (System Management Mode). The options are Disabled and Enabled. PCIe PLL SSC Enable this feature to reduce EMI interference by down spreading clock 0.5%.
  • Page 60 SuperServer 5039MS-H12TRF User's Manual Port 0 ~ Port 5 Spin Up Device On an edge detect from 0 to 1, set this item to allow the PCH to initialize the device. The options are Enabled and Disabled. Port 0 ~ Port 5 SATA Device Type Use this item to specify if the SATA port specified by the user should be connected to a Solid State drive or a Hard Disk Drive.

  • Page 61: Super Io Configuration

    Chapter 6: BIOS PXE boot wait time Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press "+" or "-" on your keyboard to change the value. The default setting is 0. Media detect count Use this option to specify the number of times media will be checked.

  • Page 62: Intel Server Platform Services

    SuperServer 5039MS-H12TRF User's Manual Serial Port 2 (SOL) Change Settings This feature specifies the base I/O port address and the Interrupt Request address of a serial port specified by the user. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ address.
  • Page 63 Chapter 6: BIOS COM1 Console Redirection Settings This feature allows the user to specify how the host computer will exchange data with the client computer, which is the remote computer used by the user. COM1 Terminal Type This feature allows the user to select the target terminal emulation type for Console Redirection.
  • Page 64 SuperServer 5039MS-H12TRF User's Manual COM1 Recorder Mode Select Enabled to capture the data displayed on a terminal and send it as text messages to a remote server. The options are Disabled and Enabled. COM1 Resolution 100x31 Select Enabled for extended-terminal resolution support. The options are Disabled and Enabled.
  • Page 65 Chapter 6: BIOS transmission speed may be required for long and busy lines. The options are 9600, 19200, 38400, 57600 and 115200 (bits per second). SOL Data Bits Use this feature to set the data transmission size for Console Redirection. The options are 7 Bits and 8 Bits.
  • Page 66 SuperServer 5039MS-H12TRF User's Manual SOL Redirection After BIOS POST Use this feature to enable or disable legacy Console Redirection after BIOS POST. When set to Bootloader, legacy Console Redirection is disabled before booting the OS. When set to Always Enable, legacy Console Redirection remains enabled when booting the OS. The options are Always Enable and Bootloader.

  • Page 67: Acpi Settings

    Chapter 6: BIOS ACPI Settings High Precision Event Timer Select Enabled to activate the High Performance Event Timer (HPET) that produces periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in synchronizing multimedia streams, providing smooth playback and reducing the dependency on other timestamp calculation devices, such as an x86 RDTSC Instruction embedded in the CPU.

  • Page 68: Iscsi Configuration

    SuperServer 5039MS-H12TRF User's Manual Pending TPM operation Use this item to schedule a TPM-related operation to be performed by a security device for system data integrity. Your system will reboot to carry out a pending TPM operation. The options are None and TPM Clear.

  • Page 69: Event Logs

    Chapter 6: BIOS  Add an Attempt  Delete Attempts  Change Attempt order 6.4 Event Logs Use this feature to configure Event Log settings. Change SMBIOS Event Log Settings  Enabling/Disabling Options SMBIOS Event Log Change this item to enable or disable all features of the SMBIOS Event Logging during system boot.

  • Page 70: View Smbios Event Log

    SuperServer 5039MS-H12TRF User's Manual When Log is Full Select Erase Immediately for all messages to be automatically erased from the event log when the event log memory is full. The options are Do Nothing and Erase Immediately. SMBIOS Event Long Standard Settings Log System Boot Event This option toggles the System Boot Event logging to enabled or disabled.

  • Page 71: Ipmi

    Chapter 6: BIOS 6.5 IPMI Use this feature to configure Intelligent Platform Management Interface (IPMI) settings. BMC Firmware Revision This item indicates the IPMI firmware revision used in your system. IPMI Status (Baseboard Management Controller) This item indicates the status of the IPMI firmware installed in your system. System Event Log ...

  • Page 72: Bmc Network Configuration

    SuperServer 5039MS-H12TRF User's Manual When SEL is Full This feature allows the user to decide what the BIOS should do when the system event log is full. Select Erase Immediately to erase all events in the log when the system event log is full.

  • Page 73: Security

    Chapter 6: BIOS Gateway IP Address This item displays the Gateway IP address for this computer. This should be in decimal and in dotted quad form (i.e., 172.31.0.1). VLAN Use this item to enable or disable the IPMI VLAN function. The options are Disable and Enable.

  • Page 74: Secure Boot Menu

    SuperServer 5039MS-H12TRF User's Manual Secure Boot Menu  This section displays the contents of the following secure boot features: • System Mode • Secure Boot • Vendor Keys Secure Boot Use this item to enable secure boot. The options are Disabled and Enabled.
  • Page 75 Chapter 6: BIOS  Key Exchange Key Set New Key Select Yes to load the KEK from the manufacturer's defaults. Select No to load the KEK from a file. The options are Yes and No. Append Key Select Yes to add the KEK from the manufacturer's defaults list to the existing KEK. Select No to load the KEK from a file.

  • Page 76: Boot

    SuperServer 5039MS-H12TRF User's Manual 6.7 Boot Use this feature to configure Boot Settings. Boot Mode Select Use this item to select the type of device that the system is going to boot from. The options are Legacy, UEFI, and Dual. The default setting is Dual.
  • Page 77 Chapter 6: BIOS • Legacy/UEFI/Dual/Boot Option #9 • Legacy/UEFI/Dual/Boot Option #10 • Legacy/UEFI/Dual/Boot Option #11 • Legacy/UEFI/Dual/Boot Option #12 • Legacy/UEFI/Dual/Boot Option #13 • Legacy/UEFI/Dual/Boot Option #14 • Legacy/UEFI/Dual/Boot Option #15  Delete Boot Option Use this feature to remove a pre-defined boot device from which the system will boot during startup.

  • Page 78: Save & Exit

    SuperServer 5039MS-H12TRF User's Manual 6.8 Save & Exit Select the Exit tab from the BIOS setup utility screen to enter the Exit BIOS Setup screen. Discard Changes and Exit Select this option to quit the BIOS Setup without making any permanent changes to the system configuration, and reboot the computer.
  • Page 79 Chapter 6: BIOS Default Options Restore Optimized Defaults To set this feature, select Restore Optimized Defaults from the Save & Exit menu and press <Enter>. These are factory settings designed for maximum system stability, but not for maximum performance. Save As User Defaults To set this feature, select Save as User Defaults from the Exit menu and press <Enter>.

  • Page 80: Appendix A Bios Error Codes

    SuperServer 5039MS-H12TRF User's Manual Appendix A BIOS Error Codes A-1 BIOS Error Beep (POST) Codes During the POST (Power-On Self-Test) routines, which are performed each time the system is powered on, errors may occur. Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process.
  • Page 81 When BIOS performs the Power On Self Test, it writes checkpoint codes to I/O port 0080h. If the computer cannot complete the boot process, a diagnostic card can be attached to the computer to read I/O port 0080h (Supermicro p/n AOC-LPC80-20). For information on AMI updates, please refer to http://www.ami.com/products/.

  • Page 82: Appendix B Standardized Warning Statements For Ac Systems

    Supermicro's Technical Support department for assistance. Only certified technicians should attempt to install or configure components. Read this appendix in its entirety before installing or configuring components in the Supermicro chassis. These warnings may also be found on our website at http://www.supermicro.com/about/...
  • Page 83 Appendix B: Standardized Warning Statements Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

  • Page 84: Installation Instructions

    SuperServer 5039MS-H12TRF User's Manual 안전을 위한 주의사항 경고! 이 경고 기호는 위험이 있음을 알려 줍니다. 작업자의 신체에 부상을 야기 할 수 있는 상태에 있게 됩니다. 모든 장비에 대한 작업을 수행하기 전에 전기회로와 관련된 위험요소들을 확인하시고 사전에 사고를 방지할 수 있도록 표준 작업절차를 준수해 주시기...

  • Page 85: Circuit Breaker

    Appendix B: Standardized Warning Statements Warnung Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. ¡Advertencia! Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación. Attention Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation. 시스템을...
  • Page 86 SuperServer 5039MS-H12TRF User's Manual Warnung Dieses Produkt ist darauf angewiesen, dass im Gebäude ein Kurzschluss- bzw. Überstromschutz installiert ist. Stellen Sie sicher, dass der Nennwert der Schutzvorrichtung nicht mehr als: 250 V, 20 A beträgt. ¡Advertencia! Este equipo utiliza el sistema de protección contra cortocircuitos (o sobrecorrientes) del edificio.

  • Page 87: Power Disconnection Warning

    Appendix B: Standardized Warning Statements Power Disconnection Warning Warning! The system must be disconnected from all sources of power and the power cord removed from the power supply module(s) before accessing the chassis interior to install or remove system components. 電源切断の警告...

  • Page 88: Equipment Installation

    SuperServer 5039MS-H12TRF User's Manual 경고! 시스템에 부품들을 장착하거나 제거하기 위해서는 섀시 내부에 접근하기 전에 반드시 전원 공급장치로부터 연결되어있는 모든 전원과 전기코드를 분리해주어야 합니다. Waarschuwing Voordat u toegang neemt tot het binnenwerk van de behuizing voor het installeren of verwijderen van systeem onderdelen, dient u alle spanningsbronnen en alle stroomkabels...

  • Page 89: Restricted Area

    Appendix B: Standardized Warning Statements Attention Il est vivement recommandé de confier l'installation, le remplacement et la maintenance de ces équipements à des personnels qualifiés et expérimentés. 경고! 훈련을 받고 공인된 기술자만이 이 장비의 설치, 교체 또는 서비스를 수행할 수 있습니다. Waarschuwing Deze apparatuur mag alleen worden geïnstalleerd, vervangen of hersteld door geschoold en gekwalificeerd personeel.
  • Page 90 SuperServer 5039MS-H12TRF User's Manual Warnung Diese Einheit ist zur Installation in Bereichen mit beschränktem Zutritt vorgesehen. Der Zutritt zu derartigen Bereichen ist nur mit einem Spezialwerkzeug, Schloss und Schlüssel oder einer sonstigen Sicherheitsvorkehrung möglich. ¡Advertencia! Esta unidad ha sido diseñada para instalación en áreas de acceso restringido. Sólo puede obtenerse acceso a una de estas áreas mediante la utilización de una herramienta especial,...

  • Page 91: Battery Handling

    Appendix B: Standardized Warning Statements Battery Handling Warning! There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions 電池の取り扱い...

  • Page 92: Redundant Power Supplies

    SuperServer 5039MS-H12TRF User's Manual 경고! 배터리가 올바르게 교체되지 않으면 폭발의 위험이 있습니다. 기존 배터리와 동일하거나 제 조사에서 권장하는 동등한 종류의 배터리로만 교체해야 합니다. 제조사의 안내에 따라 사용 된 배터리를 처리하여 주십시오. Waarschuwing Er is ontploffingsgevaar indien de batterij verkeerd vervangen wordt. Vervang de batterij slechts met hetzelfde of een equivalent type die door de fabrikant aanbevolen wordt.
  • Page 93 Appendix B: Standardized Warning Statements ¡Advertencia! Puede que esta unidad tenga más de una conexión para fuentes de alimentación. Para cortar por completo el suministro de energía, deben desconectarse todas las conexiones. Attention Cette unité peut avoir plus d'une connexion d'alimentation. Pour supprimer toute tension et tout courant électrique de l'unité, toutes les connexions d'alimentation doivent être débranchées.

  • Page 94: Backplane Voltage

    SuperServer 5039MS-H12TRF User's Manual Backplane Voltage Warning! Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when servicing. バックプレーンの電圧 システムの稼働中は危険な電圧または電力が、 バックプレーン上にかかっています。 修理する際には注意く ださい。 警告 当系统正在进行时，背板上有很危险的电压或能量，进行维修时务必小心。 警告 當系統正在進行時，背板上有危險的電壓或能量，進行維修時務必小心。 Warnung Wenn das System in Betrieb ist, treten auf der Rückwandplatine gefährliche Spannungen oder Energien auf.

  • Page 95: Comply With Local And National Electrical Codes

    Appendix B: Standardized Warning Statements 경고! 시스템이 동작 중일 때 후면판 (Backplane)에는 위험한 전압이나 에너지가 발생 합니다. 서비스 작업 시 주의하십시오. Waarschuwing Een gevaarlijke spanning of energie is aanwezig op de backplane wanneer het systeem in gebruik is. Voorzichtigheid is geboden tijdens het onderhoud. Comply with Local and National Electrical Codes Warning! Installation of the equipment must comply with local and national electrical codes.

  • Page 96: Product Disposal

    SuperServer 5039MS-H12TRF User's Manual 경고! 현 지역 및 국가의 전기 규정에 따라 장비를 설치해야 합니다. Waarschuwing Bij installatie van de apparatuur moet worden voldaan aan de lokale en nationale elektriciteitsvoorschriften. Product Disposal Warning! Ultimate disposal of this product should be handled according to all national laws and regulations.
  • Page 97 Appendix B: Standardized Warning Statements Attention La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent. 경고! 이 제품은 해당 국가의 관련 법규 및 규정에 따라 폐기되어야 합니다. Waarschuwing De uiteindelijke verwijdering van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen.
  • Page 98 SuperServer 5039MS-H12TRF User's Manual Warnung Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger, Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt. ¡Advertencia! Los ventiladores podran dar vuelta cuando usted quite ell montaje del ventilador del chasis.

  • Page 99: Power Cable And Ac Adapter

    Brand entstehen. Elektrische Geräte und Material Safety Law verbietet die Verwendung von UL-oder CSA-zertifizierte Kabel, UL oder CSA auf der Code für alle anderen elektrischen Geräte als Produkte von Supermicro nur bezeichnet gezeigt haben. ¡Advertencia! Al instalar el producto, utilice los cables de conexión previstos o designados, los cables y adaptadores de CA.
  • Page 100 Het gebruik van andere kabels en adapters kan leiden tot een storing of een brand. Elektrisch apparaat en veiligheidsinformatiebladen wet verbiedt het gebruik van UL of CSA gecertificeerde kabels die UL of CSA die op de code voor andere elektrische apparaten dan de producten die door Supermicro alleen.

  • Page 101: Appendix C Uefi Bios Recovery Instructions

    Warning: Do not upgrade the BIOS unless your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system. In no event shall Supermicro be liable for direct, indirect, special, incidental, or consequential damages arising from a BIOS update.
  • Page 102 Directory of a USB device or a writeable CD/DVD. Note: If you cannot locate the "Super.ROM" file in your driver disk, visit our website at www.supermicro.com to download the BIOS image into a USB flash device and rename it "Super.ROM" for BIOS recovery use.
  • Page 103 Appendix C: UEFI BIOS Recovery 4. After locating the new BIOS binary image, the system will enter the BIOS Recovery menu as shown below. Note: At this point, you may decide if you want to start with BIOS recovery. If you decide to proceed with BIOS recovery, follow the procedures below.
  • Page 104 SuperServer 5039MS-H12TRF User's Manual 6. After the process of BIOS recovery is completed, press any key to reboot the system. 7. Using a different system, extract the BIOS package into a bootable USB flash drive. 8. When a DOS prompt appears, enter FLASH.BAT BIOSname.### at the prompt.

  • Page 105: Appendix D System Specifications

    Appendix D: System Specifications Appendix D System Specifications Processors Single Intel Xeon E3-1200 v5 in an H4 LGA1151 type socket, 80W max TDP. Note: Please refer to the motherboard specifications pages on our website for updates to supported processors. Chipset Intel PCH C236 chipset BIOS 128 Mb AMI®...
  • Page 106 SuperServer 5039MS-H12TRF User's Manual Operating Environment Operating Temperature: 10º to 35º C (50º to 95º F) Non-operating Temperature: -40º to 70º C (-40º to 158º F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Table of Contents