Supermicro 5038AD-I User Manual page 108

5038AD-I User's Manual
CPU Turbo Setting
Package TDP Lock Enable
Select Enabled to lock the Thermal Design Power (TDP) value for the processor.
The options are Disabled and Enabled.
Long Duration Power Limit (Watt)
This feature confi gures Package Power Limit 1, in watts. When the limit is exceeded,
the CPU ratio is lowered after a period of time (see item below). A lower limit
can save power and protect the CPU, while a higher limit improves performance.
Use the number keys on your keyboard to enter the value. The default setting is
dependent on the CPU.
Long Duration Power Limit Time (Seconds)
This item allows the user to determine how long the CPU should operate at the
power limit set by the user for the item above, if the power limit is exceeded. Use
the number keys on your keyboard to enter the value. The default setting is 8.
Short Duration Power Limit Switch
Select Enabled for power limit switch Package Power Limit 2. The settings are
Disabled and Enabled.
Short Duration Power Limit (Watt)
This feature confi gures Package Power Limit 2, in watts. When the limit is exceeded,
the CPU ratio is lowered immediately. A lower limit can save power and protect the
CPU, while a higher limit improves performance. Use the number keys on your
keyboard to enter the value. The default setting is dependent on the CPU. The
default setting is dependent on the CPU.
Package Current Lock
Select Enabled to lock the current CPU package values. The options are Enabled
and Disabled.
Processor Current Limit (1/8 Amp)
This feature allows the user to set the maximum electric current value for the Intel
CPU cores. The default setting is dependent on the type of CPU installed.
Disable OverClocking Lock
If this feature is set to Enabled, the OverClocking Lock will be deactivated. The
options are Disabled and Enabled.
4-18