Table of Contents
Advertisement
Removing the expansion card risers
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Disconnect any cables connected to the expansion card.
4
Remove the air shroud. For more information, see
Step
Hold the touch points, and lift the expansion card riser, from the riser connector, on the system board.
Figure 49. Removing the low profile left riser
NOTE:
For low profile riser right, first loosen the captive screw and then holding the touch points lift the riser away from
the system.
90
Installing and removing system components
Safety
instructions.
Before working inside your
Removing the air
system.
shroud.
Advertisement
Table of Contents
