Removing And Transporting The Display - SMART SPNL-6265-V2 Installation And Maintenance Manual

CHAPTER 6
MAINTAINING THE DISPLAY

Removing and transporting the display

If the display is wall mounted, you might need to remove it from its current location and transport it
to another location on occasion.
To remove and transport the display safely, use two or more professional installers.
WARNING
Do not attempt to move the display by yourself. The display is very heavy.
l
Do not move the display by connecting a rope or wire to the handles on the back. The
l
display can fall and cause injury and product damage.
IMPORTANT
Follow the instructions included with the mounting hardware.
To remove the display
1. Turn off any connected computers.
2. Turn off the display (see Turning the display off and back on on the previous page)
3. Flick the switch beside the AC power inlet to the OFF (O) position.
4. Remove all accessible cables and connectors.
5. Remove the iQ appliance from the accessory slot.
6. Lift the display from its mounting location.
WARNING
Do not place the display on a sloping or unstable cart, stand or table, because the display
could fall, resulting in injury and severe product damage.
CAUTION
Do not leave the display face up, face down or upside down for an extended period,
because it could cause permanent damage to the screen.
7. Remove the mounting brackets.
48 smarttech.com/kb/171167