Turning The Display Off And Back On; Resetting The Display; Removing And Transporting The Display - SMART MX Series Instruction For Installation And Maintenance

CHAPTER 7
MAINTAINING THE DISPLAY
can purchase replacement pens from the Store for SMART Parts
(see smarttech.com/Support/PartsStore).

Turning the display off and back on

In most situations, you can put the display to sleep when not using it following the instructions in the
SMART Board MX series interactive displays user's guide (smarttech.com/kb/171284).
In some situations, such as when you need to transport the display or clean its screen, you need to
turn the display off for a period of time. You can turn it back on after.
To turn the display off
1. Press and hold the Power button
To turn the display back on
Press the Power button

Resetting the display

You can reset the display and the iQ appliance using the switch on the back of the panel.
To perform a factory reset, see Recovery on page 62. A factory reset returns all options to their
default values.
To reset the display
1. Flick the switch to the OFF (O) position.
2. Flick the switch to the ON (|) position.
The display and iQ appliance reset.

Removing and transporting the display

If the display is wall mounted, you might need to remove it from its current location and transport it
to another location on occasion.
38 smarttech.com/kb/171257
on the front control panel for two seconds.
on the front control panel.