Leica GS15 User Manual page 44

GS10/GS15, Operation
Step Description
5. In the General page, select Internet Protocol (TCP/IP) from the list and
click Properties. The Internet Protocol (TCP/IP) properties windows is
started.
6. Set IP address: 192.168.253.1 and Subnet mask: 255.255.255.0 and
click OK confirm the settings.

This procedure has to be done only once.
Establishing a Bluetooth connection between PC and GS GNSS instrument
Step Description
1. Start the PC and turn on the GS GNSS instrument.

Instead of connecting to your PC, you can connect your GS GNSS
instrument to the field controller. In this case, turn on the field
controller, start Leica SmartWorx Viva/Leica Captivate and establish
a Bluetooth connection to the GS GNSS instrument.
2. Run the Bluetooth software and start the Bluetooth Setup Wizard.
3. Click Next. The Bluetooth Device Selection will be started and an auto-
matic search will be done.
4. Select the shown GS GNSS instrument and click Next. The Bluetooth Security
Setup is started.
5. Type in 0000 as Bluetooth security code and click Pair Now. The pairing
procedure will be done and the Bluetooth Service Selection is started.
6. Highlight Personal Ad-hoc Network and check the checkbox for Personal
Ad-hoc Network.

Do not select Serial Port as service.
7. Click Next. The Bluetooth Setup Wizard Completion Page is started.
8. Type in a name for your GS GNSS instrument and click Finish to complete
the Bluetooth Setup Wizard.

This procedure has to be repeated for every GS GNSS instrument you want
to connect to.
Accessing the Web server
Step Description
1. Start the web browser on your PC/field controller.

Ensure that your GS GNSS instrument is still running and the Blue-
tooth connection between PC/field controller and GS is established.
2. Type in 192.168.253.2. The Web server is started. You will see the home
functions following:
• Go to Work!
– To select and start the Wake-up application.
• Current Status
– To access GNSS information of the GS as well as the instrument firm-
ware.
• Instrument
– To access configuration settings for the GS.
• User
– To upload and activate firmware, licence keys and languages.
44