Product Layout - gofanco HDbaseT-HDR User Manual

Product Layout

No.
1
2
3
4
5
6
7
8
Figure 1: Transmitter and Receiver
Name
Mode Switcher
Power LED
HDMI IN (Transmitter)
HDMI OUT (Receiver)
3-Pin Terminal Block
(Transmitter)
3-Pin Terminal Block
(Receiver)
IR IN
IR OUT
HDBT OUT (Transmitter)
HDBT IN (Receiver)
DC 12V Power Jack
Description
- CTRL: RS-232 pass-through
- UPDATE A: Firmware update mode
- UPDATE B: Update compression IC
Red when power adapter is connected
Connects to your HDMI source
Connects to your HDMI display
RS-232 pass-through. Connects to your
computer's RS-232 port using the included
RS-232 cable
RS-232 pass-through. Connects to your
end device's RS-232 port using the
included RS-232 cable
Plug the IR Receiver Extension cable here,
receives signals from an IR remote control
Plug the IR Blaster Extension cable here,
transmitts the signals from an IR remote
control
Connects to the HDBT IN of the Receiver
using a CAT5e/6 cable
Connects to the HDBT OUT of the
Transmitter using a CAT5e/6 cable
Plug the included power adapter into
either power jack, to power both units
5