Related Manuals for gofanco HDBITT4K22
Summary of Contents for gofanco HDBITT4K22
- Page 1 HDMI HDbitT Extender 4K HDCP 2.2 - 120m User's Guide Part Number: HDBitT4K22 (Kit) HDBitT4K22-RX (Receiver) G4-0072A...
- Page 2 Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User's Guide for future reference. If you need more information about our products, please visit www.gofanco.com.
-
Page 3: Package Contents
Extends HDMI signal up to 120 meters (394ft) over • a single Cat6 cable Supports One-to-One, One-to-Many, or Cascade • configurations Additional Receivers (part # HDBitT4K22-RX) sold • separately Supports IR remote control function to control the • source device from long distances... - Page 4 Product Layout Figure 1: Transmitter (TX) HDMI In: Connect your HDMI source here with an HDMI cable (cable not included) IR Out: Infrared 3.5mm socket. Plug IR Blaster Cable here. See instructions on page 6. Reset: Press to reset if the HDMI Extender doesn't work properly Power LED: On when the Transmitter is powered Power Jack: Connect the included power adapter...
-
Page 5: Installation Requirements
Figure 2: Receiver (RX) HDMI Out: Connect your HDMI display here with an HDMI cable (cable not included) IR In: Infrared 3.5mm socket. Plug IR Receiver Cable here. See instructions on page 7. Reset: Press to reset if the HDMI Extender doesn't work properly Power LED: On when the Receiver is powered Power Jack: Connect the included power adapter... -
Page 6: Hardware Installation
Cat Cable Wiring We suggest both RJ45 connectors be wired identically using T568B wiring standard for the best performance and compatibility. Hardware Installation To achieve optimal performance, Cat6 cable is recommended. Power off all devices including your HDMI source and HDMI display. Connect your HDMI source to the Transmitter's HDMI In connector. -
Page 7: Connection Diagram
Connect your HDMI display to the Receiver's HDMI Out connector with an HDMI cable (HDMI cable not included). Optional: Connect the IR Receiver Cable to the Receiver's IR In port. This connection is needed only if you need to control your HDMI source device from the remote location. - Page 8 One-to-Many: Extend and split using dedicated network router/switch. - One Transmitter (TX) to several Receivers (RX). - Additional Receivers (part # HDBitT4K22-RX) sold separately. HDMI Out Receiver Display HDMI In Cat Cable HDMI Out Cat Cable Switch Receiver Display Transmitter...
- Page 9 FAQ & Solutions Q1: The TV displays "Waiting for connection..." on the right corner: 1. Check whether the power adapter of Transmitter (TX) and Receiver (RX) or Network Router/Switch (if used) is connected. 2. Make sure the network cable (Cat6) is firmly connected between the TX and RX.
-
Page 10: Specifications
Specifications Item Specification Compliance HDMI 1.4, HDCP 2.2 Transmission protocol HDbitT 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, HDMI input resolution 1080i@50/60Hz, 1080p@50/60Hz, 4Kx2K@24/25/30Hz HDMI output resolution 1080p@60Hz, 4Kx2K@30Hz Cat5: Up to 80m (262ft) Transmission distance Cat5e: Up to 100m (328ft) Cat6: Up to 120m (394ft) IR signal 20KHz - 60KHz Operating temperature... - Page 11 Disclaimer The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user's guide. The pictures on the user's guide are just for reference, and there may be some slight differences with the acutal products.
- Page 12 Thank you for choosing gofanco www.gofanco.com...
Need help?
Do you have a question about the HDBITT4K22 and is the answer not in the manual?
Questions and answers