Understanding The Printer Sounds; Using The Batteries - Intermec PB50 User Manual

Understanding the Printer Sounds

Using the Batteries

PB50 and PB51 Mobile Printer User's Guide
The printer plays sounds in response to several actions that you can
take with it. Use the following table to understand when the sounds
occur and what they mean.
Understanding the Printer Sounds
Sound Occurs When:
•
Power
•
Hardware You open the media door, close the media door, or insert a
cable.
Button You press any of the printer buttons.
•
Error
•
The printer uses a rechargeable 2200 mAh lithium-ion battery (Model
AB13) for power. You must fully charge the battery before you can use
the printer. A fully charged battery can last up to one week without
needing to be recharged when the printer is in Standby mode.
Use Intermec Model AB13 battery only. Use of another battery
may present a risk of fire or explosion.
The Model AB13 battery may present a fire or chemical burn
hazard if mistreated. Do not disassemble, heat above 100°C
(212°F), or incinerate.
Dispose of used batteries promptly. Keep away from children.
Chapter 1 — Using the Mobile Printer
You supply power (battery or AC adapter) to the
printer.
The printer starts charging the battery.
The printer cannot feed paper or print a job because of
a hardware issue such as the media door open, a paper
jam, or there is no media.
An error occurs such as a paper jam or a print error.
7