Understanding The Battery Icons - Intermec PB50 User Manual

Understanding the Battery Icons

PB50 and PB51 Mobile Printer User's Guide
• Connect AC power to the printer and charge the battery while it is
in the printer.
• Charge the battery in the AC18 4-bay battery charger.
For information on charging your battery in the 4-bay battery
charger, see the AC18 4-Bay Battery Charger
It takes approximately 6 hours to charge the battery while it is
installed in the printer. To charge the battery inside the printer, you
need:
• an Intermec 12 VDC power supply (Model AE19).
• an AC power cord.
To charge the battery inside the printer
1 Install the battery in the printer. For help, see the previous section,
"Installing the Battery" on page
2 Connect the power supply to the DC power connector on the
printer.
3 Connect one end of the power cord to the power supply and then
plug the other end into an AC outlet.
The easiest way to tell the status of your battery is to look at the
battery icons on the control panel of the printer.
Battery Icon Status
Icon Status
Battery is fully charged.
Battery has a medium charge. You should be able to
work for several more hours before charging or
replacing the battery.
Battery is low. You need to replace the battery soon.
Battery is critically low. You need to replace the
battery now.
Battery charging error. You may need to replace the
battery.
Chapter 1 — Using the Mobile Printer
Instructions.
8.
9