Working Light Switch; Controls For Attachments - Kubota K008-3 Operator's Manual

14 EXCAVATOR OPERATION
BWorking Light Switch
If the key is in the "ON" position, the lights will
be switched on by tipping the switch.

(1) Working light switch

C Night operation
To avoid personal injury:
A Visibility is reduced in darkness, so
that the working light alone is not
enough. Prepare additional lighting,
observe safety rules as well as special
regulations for night work.
(A) "ON
(B) "OFF"

CONTROLS FOR ATTACHMENTS

The levers move the boom, arm and bucket as
well as the swing frame. The lever positions
and functions are as follows:
[NOT TWO PATTERN SELECTION TYPE]
To avoid personal injury:
A Study and familiarize control lever
functions by operating slowly.
A Be sure to check the operating pattern
in the label on the front hood before
operating the excavator.
[TWO PATTERN SELECTION TYPE]
To avoid personal injury or death:
A The control lever pattern on this
machine is
operation, check the current pattern.
Otherwise the machine may get in
trouble or you may get injured.
A Before changing the control lever
pattern, be sure to stop the engine.
A Before operation, be sure to look
around for safety. Move the levers
slowly.
A Make sure the control lever pattern
has been changed as specified.
changeable. Before