Operation Of The Dozer Width - Kubota K008-3 Operator's Manual

3. After track width change, be sure to set the
track width change/dozer select lever to the
"Dozer" position (A).
EXCAVATOR OPERATION
BOperation of the Dozer Width
For changing from standard width to narrow
width:
1. Pull out the fixing pin (2) and remove the
extension dozer (1).
2. Set the extension dozer (1), insert fixing pin
(2) as illustration.
3. It is the same operations for opposite side
(left or right), and also for changing from
narrow width to standard width.
(1) Extension dozer
(2) Fixing pin
21