Replacing Fuel Filter Element; Every 1000 Service Hours; Replacing Of The Suction Filter And The Return Filter In The Hydraulic; Tank) - Kubota K008-3 Operator's Manual

BReplacing Fuel Filter Element
To avoid personal injury:
A Keep away from fire.
1. Close the fuel shutoff-valve.
(1) Fuel shutoff-valve
2. Unscrew the retaining ring and remove the
filter cup. Clean the inside of the cup with
light oil.
3. Remove and replace the element with new
one into position and tighten a up by hand.
4. Reassemble the filter cup and the retaining
ring.
5. Open the fuel shutoff-valve again.
(1) O rings
(2) Element
(3) Filter cup
(4) Retaining ring
A After replacement of the element, the fuel
system must purged.
REGULAR CHECKS AND MAINTENANCE WORK
(A) "Open"
(B) "Closed"

EVERY 1000 SERVICE HOURS

Do all 50, 200 and 500 hour servicing at the
same time.
BHydraulic Oil Change (Including
Replacing of the Suction Filter and
the Return Filter in the Hydraulic

Tank)

A Contact your KUBOTA dealer for details.
(1) Suction filter
(2) Return filter
(3) Drain plug
47