Kubota K008-3 Operator's Manual page 34

C Pattern Change
Switching from [Pattern A] to [Pattern B]
1. Stop the engine and place the front
attachment on
pressure out of the cylinders.
2. Turn the knob on the control box to open the
cover.
(1) Knob
3. Remove the bolts (1) and (2).
(1) Bolt1
(2) Bolt2
the ground. Release
(3) Joint (C)
(4) Joint (D)
EXCAVATOR OPERATION
4. Shift the joints (C) and (D) to the right, and
apply and tighten up the bolts (1) and (2).
(1) Bolt1
(2) Bolt2
To avoid personal injury:
A The bolts (1) and (2) are of special
type. Do not use general bolts,
because otherwise the machine may
malfunction and get damaged.
15
(3) Joint (C)
(4) Joint (D)