Kubota K008-3 Operator's Manual page 13

-4 SAFE OPERATION
3. AFTER OPERATION
Before leaving the machine,
A Bring the excavator to hard even ground.
A Lower the attachments and the dozer blade
on the ground.
A Stop the engine.
A Lock all control levers.
A Remove the key.
(1) Lock lever (A) "Lock"
(B) "Unlock"
4. SAFE LOADING AND TRANSPORT
OF THE EXCAVATOR
1. Observe all regulations concerning the
transport of excavators on public roads.
2. Use adequately long and robust ramps
when loading on a truck. (for details see
"TRANSPORTING THE EXCAVATOR ON
A TRUCK")
3. Do not change the running direction and to
avoid a tipping over, do not try to swing the
attachment crosswise to the loading ramps.
4. After loading of the excavator on a truck,
engage the swing lock pin.
Lower the attachment on the loading plane
and release the pressure from the hydraulic
system.
Block the crawlers with blocks and wire
down the excavator. After loading the
excavator on a truck, tie down the
undercarriage of the excavator with a strong
steel wire on the truck.
(1) Swing lock pin
5. Do not brake abruptly with the excavator
loaded. Fatal accidents could happen.
(A) "Lock"
(B) "Unlock"