Two Pattern Selection System (Tpss); Working Light Switch; Travel Buzzer; Pattern Change - Kubota U17-3 Tier4 Operator's Manual

Working Light Switch

If the key in "RUN" position, the lights can be
switched on by pressing the switch.
(1) Working light switch
Night operation
CAUTION
3
To avoid personal injury:
Visibility is reduced in darkness,
so that
alone is not enough. Prepare
additional
safety rules as well as special
regulations for night work.
Travel Buzzer (OPTION)
When you handle the drive levers, the buzzer
sounds at the same time or before the
excavator starts to run.
the working light
lighting, observe
TWO PATTERN SELECTION
SYSTEM (TPSS)
CAUTION
3
To avoid personal injury:
Study control lever pattern A
and pattern B.
Then choose the one which is
most familiar
Position the pattern selector
lever in either the left side
position of the machine (pattern
A) or the right side
(pattern B).
Familiarize yourself with the
pattern selected by operating
slowly.

Pattern Change

Position the pattern selector lever to the
desired position.
(1) Pattern selector lever
(Two Pattern Selection
System: TPSS)
31
position
(A) Pattern A
(B) Pattern B