Getting Started; Powering On; Ac Adapter Components - Winmate W07FA3S-PCM1AC-PoE User Manual

2 Getting Started

This chapter provides information on how to connect the HMI device to the source of
power, connector pinouts and the guideline to turn on/off the HMI device.

2.1 Powering On

2.1.1 AC Adapter Components

Safety Precautions:
 Do not use the adapter in a high moisture environment
 Never touch the adapter with wet hands or foot
 Allow adequate ventilation around adapter while using
 Do not cover the adapter with paper or other objects that will reduce cooling
 Do not use the adapter while it is inside a carrying case
 Do not use the adapter if the cord is damaged
 There are NO serviceable parts inside
 Replace the unit if it is damaged or exposed to excess moisture
While using the AC Adapter always:
 Plug-in the power cord to easy accessible AC outlet
 Plug-in the AC adapter to a grounded outlet
ALTERNATING CURRENT / MISE À LE TERRE!
This product must be grounded. Use only a grounded AC outlet.
Install the additional PE ground wire if the local installation
regulations require it.
*If you do not use a grounded outlet while using the device, you may
notice an electrical tingling sensation when the palms of your hands
touch the device.
7" S-Series HMI
AC Adapter
(12V/ 36W)
Power Cable
8