Table of Contents
Advertisement
Getting Started
Turning On Your Device
Follow the following steps to turn on your device:
1. Connect the Panel PC to a thermal block (3-pin).
2. Connect the other side of the thermal block to the AC adapter.
3. Connect the AC adapter to the power cord.
4. Plug in the power cord to a working AC wall outlet. The device
will boot automatically.
CAUTION
Use only the AC adapter (12V/ 50W) included in your
package
(Rating: Output 4.2 A). Using other AC adapters may
damage the device.
ALTERNATING CURRENT
This product must be grounded. Use only a grounded
AC outlet. Install the additional PE ground wire if the
local installation regulations require it.
- 15 -
Advertisement
Table of Contents
