Table of Contents
Advertisement
2.
INSTALLATION
2.1 Removal from packaging
The equipment is packed in durable packages specially
designed for them. Check the equipment before taking
it into use, to make sure that the equipment or a part
of it have not got damaged during the transportation.
Also check that the delivery corresponds your order and
that you have received all the necessary instructions for
installing and operating the equipment. The packaging
material can be recycled.
2.2 Locating the machine
Place the machine on a horizontal, stable and clean
ground. Protect the machine from heavy rain and burning
sunshine. Check that there is enough space for cooling air
circulation in front of and behind the machine.
2.3 Serial number
The serial number of the machine is marked on the
machine CEmarking. Identificating the serial number is
the only proper means of maintaining and identifying
parts for a specific product. It is important to make
correct reference to the serial number of the product
when making repairs or ordering spare parts.
2.4 Installation and main parts
2.4.1 Assembling the equipment
The equipment is assembled in the following order:
1.
A7 Cooler
2.
Transport unit PM500
(If used with FastMig)
Assembly the transport unit according to the instructions
in the package. Fasten the cooling unit to the transport
unit by using the screws and bolts delivered with the
equipment.
2.4.2 Main parts of cooling unit
4
2
1
© Kemppi Oy 2016
6068220
6185291
5
Front machine
6
3
8
7
Back side
4
A7 Cooler
1.
Housing
2.
Test switch
3.
Overheat control lamp
4.
Filling hole
5.
Mains voltage connection cable
6.
Control cable
7.
Cooling water output hose
8.
Cooling water input hose
1636
Advertisement
Table of Contents
