Keypad Information; Meter Maintenance - Thermo Scientific Orion Star A112 Reference Manual

Keypad Information

In the measurement screen: Press to take a measurement.
In the setup screen: Press to escape the setup menu.
In the calibration screen: Press to abort calibration.
Press to turn the meter on or off.
Press to enter the calibration mode.
In the measurement screen:
Press to store the data on the screen in continuous
read mode and with data logging on.
In the setup screen:
Press to scroll up in the list of options.

Meter Maintenance

For routine meter maintenance, dust and wipe the meter with a damp cloth. If necessary, warm water or a mild water-
based detergent can be used. Meter maintenance can be performed on a daily, weekly or monthly basis, as required by
the environment in which the meter is operated. Immediately remove any spilled substance from the meter using the
proper cleaning procedure for the type of spill.
Thermo Scientific Orion Star A112 Benchtop and Star A122 Conductivity Portable Meters
In the measurement screen:
Press to switch between modes.
In the setup screen:
Press to confirm the selection.
Press to enter the setup mode.
In the measurement screen:
Press to see the stored data.
In the setup screen:
Press to scroll down in the list of options.
5