Vecow RCS-9430F-GTX1080 User Manual page 128

6. Select disks to create RAID Volume then Save Changes and Reset to install
OS with EFI mode.
C.2 OS Installation
The system six SATA, including four internal SATA, one mSATA and one CFast.
You can select one of the SATA ports for OS installation.
We used CFast card for Windows 10 OS installation as an example.
C.3 To Install All Device Drivers of the System
The instructions are as follows :
1. Install Chipset driver
2. Install Network driver
3. Install ME driver (if available)
4. Install Audio driver
5. Install VGA driver
C.4 To Install "Intel Rapid Storage Technology" Software
You can get the software on driver CD.
Also, you can find the latest information and software directly from Intel's website.
http://www.intel.com/p/en_US/support/highlights/chpsts/imsm
The RAID environment has been done if you completed the steps above.
C.5 To Insert SATA HDD for RAID 1
Please note, you can use two SATA ports for SATA HDD, except for mSATA slot.
Appendix C
©Vecow RCS-9000F GTX1080 User Manual
120