Vecow RCS-9430F-GTX1080 User Manual page 125

Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or hardware problem)
BOOL GetDIO1(WORD *DI) (it is the same as GPIO)
BOOL GetDIO2(WORD *DI
Get non-isolated DIO input (DIO input)
DI ([15:0]): Input state, pin setting by hexadecimal bitmask
1: High;
0: Low
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or call by pointer error, or hardware
problem)
BOOL SetDIO1(WORD DO) (it is the same as GPIO)
BOOL SetDIO2(WORD DO)
Set non-isolated DIO output (DIO output)
DO ([15:0]): output state, pin setting by hexadecimal bitmask
1: High;
0: Low
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or hardware problem)
BOOL GetWDT(DWORD *WDT)
Get watchdog timer setup
WDT: watchdog timer setup
Unit: second. (Range: 0 ~ 65535 sec, 1093 ~ 65535 min
(=65580 ~3932100 sec))
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or call by pointer error, or hardware
problem)
BOOL SetWDT(DWORD WDT)
Set watchdog timer setup
WDT: watchdog timer setup
Unit: second. (Range: 0 ~ 65535 sec, 1093 ~ 65535 min
(=65580 ~ 3932100 sec))
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or call by pointer error, or hardware problem)
BOOL CancelWDT()
Cancel watchdog timer
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or hardware problem)
Appendix B
117