Vecow RCS-9430F-GTX1080 User Manual page 112

PCH LAN Controller
Enable or disable onboard NIC.
Wake on LAN
Enable or disable integrated LAN to wake the system. (The wake On LAN
cannot be disabled if ME is on at Sx state.)
Serial IRQ Mode
Configure serial IRQ mode.
State After G3
Specify what state to go to when power is re-applied after a power failure (G3
state).
S0 State: Always turn-on the system when power source plugged-in.
S5 State: Always turn-off the system when power source plugged-in.
4.4.2.1 PCI Express Configuration of PCH-IO
Figure 4-4-2-1: PCH-IO Settings
DMI Link ASPM Control
Enable/Disable the control of Active State Power Management on SA side of the
DMI Link.
Native PCIE Enable
PCIE Express Native Support Enable/Disable.
®
Intel Ethernet Controller I210
®
Bios options for PCIe device on Intel Ethernet Controller I210 LAN.
miniPCIe Slot 1~3
Bios options for PCIe devices on miniPCIe Slot.
PCI Express x4 Slot
Bios options for PCIe device on PCI Express x4 Slot.
©Vecow RCS-9000F GTX1080 User Manual BIOS AND DRIVER SETTING 104