Weight And Dimensions; Connectors; Ethernet/Poe-Out Port - Ruckus Wireless ZoneFlex 7761-CM Installation Manual

Hardware Features

Weight and Dimensions

Weight and Dimensions
The CMAP has the following weight and dimensions:
Unit weight: 14 pounds (6kg)
■
Unit size: 33 x 42 x 21cm (plus the hangers, which add approximately 8cm more to the
■
height)
Shipping weight: 17 pounds (8kg)
■
Shipping size: 39 x 41 x 52cm
■

Connectors

The CMAP provides the following connectors:
PoE-Out connector: RJ-45 port that can supply power to devices that support PoE.
■
Three N-type antenna connectors: Connects to up to three 5GHz external antennas,
■
one horizontally polarized and one or two vertically polarized (not supplied with the
CMAP).
Customer-supplied DC power supply: Connected through a 4-pin connector, which is
■
normally used only for configuring or testing the CMAP.
the CMAP"
"Step 2: Supply DC Power to the CMAP"
adapter assembly, which includes a reset button used to reboot the CMAP.
Coaxial cable Connector B (see
■
and AC power when deployed in the field.

Ethernet/PoE-Out Port

The CMAP provides one 10/100Mbps RJ45 Ethernet port, which also functions as a PoE-
Out port. The PoE-Out port, which can supply up to 15.4 watts (compliant with 802.3af),
can be used to power PoE-capable devices (for example, an IP-based surveillance camera).
NOTE: The PoE-Out function is non-operational when the unit is powered via the 12 VDC
connector.
NOTE: By default, both Ethernet data and PoE-Out are enabled. If necessary, you can
disable PoE-Out from the Web interface. Refer to the AP User Guide for more information.
34
on page 10 includes a picture of a typical DC power supply.
Figure
"Step 2: Supply DC Power to
on page 10 also shows the CMAP power
22) must be connected to the CMTS backbone