Fujitsu AUYG07LVLA Design & Technical Manual page 205

¢ Specifications
Dimensions and other specifications on the wired remote controller are as follows.
75
Front View
Size (H × W × D)
Weight
Cable length (accessory)
Power
 Wiring specifications
Use
Remote controller cable
¢ Installation
Connect the end of remote controller cable directly to the exclusive terminal block.
NOTES:
• Layout of terminal block and PCB varies depending on the type of indoor unit.
• Operation may fail if it is connected to the outdoor unit or the terminal block for power supply.
Hole: 9 × 4.5
19
Hole: 6 × 4.5
Side View
mm
g
m
V
Cable size
2
0.33 to 1.25 mm
Terminal block
Functional earthing
(If necessary)
Remote controller cable
(Non-polar)
- 197 -
30.0 30.0
23.0
Hole: 12.5 × 4.5
Rear View
120 × 75 × 19
120
10
12
Wire type
Non-polar 2-core,
Use sheathed PVC cable.
Twisted pair
Indoor unit PCB
Unit: mm
Remarks