14-10.Wired Remote Controller (Uty-Rnryz*) - Fujitsu AUYG07LVLA Design & Technical Manual

14-10. Wired remote controller (UTY-RNRYZ*)
DIP switch
¢ Switch location
¢ Dip switch setting
 SW1: Memory backup setting (only for wired remote controller)
Set to "ON" to use batteries for the memory backup.
When batteries are not used, all of settings stored in memory will be deleted if there is a pow-
er failure.
SW1
OFF
ON
NOTE: Never turn it on in the case of simple remote controller.
SW1 Memory backup setting
Memory backup
Front case (back side)
Set the DIP switch to ON
OFF ON
Invalidity
Validity
- 253 -
Factory setting
♦