Fujitsu AUYG07LVLA Design & Technical Manual page 158

¢ Combination of external input and output
By combining the function setting of the indoor unit, you can select various combinations of func-
tions.
Combination examples of external input and output are as follows:
Mode Function setting
0 60—00
1—8 60—01 to 60—08
9 60—09
10 60—10
11 60—11
NOTE: Input of Operation/Stop depends on the setting of function setting 46.
• 00: Operation/Stop mode 1 (R.C. enabled)
• 01: (Setting prohibited)
• 02: Forced stop
• 03: Operation/Stop mode 2 (R.C. disabled)
 Input signal type
• Indoor unit
Input signal type is only "Edge".
External input
Terminal
Operation/Stop
(Setting prohibited)
Operation/Stop
Operation/Stop
Operation/Stop
Edge
- 150 -
External output
C47
Error status
Indoor unit fan operation status
External heater output