Fujitsu AUYG07LVLA Design & Technical Manual page 192

5. Attach the front case.
• Insert after adjusting upper part of front case.
• When insert the front case, do not pinch the cable.
CAUTION
Insert the upper case firmly. If improperly attached, it will cause the upper case to fall off.
¢ Installation
 Connection pattern
NOTE: Connection pattern is different according to type of Indoor unit.
Wall mounted
 Pattern A
Connect the end of remote controller cable directly to the exclusive terminal block.
M4 screw
Terminal block
NOTE: It may be failed if it is connected to the outdoor unit or the terminal block for power
supply.
Front case
Good Prohibited
Indoor unit type
Compact cassette
Slim duct, Mini duct
Floor/Ceiling
LU
LM
LF
Floor
Remote controller
terminal block
Remote controller cable
Click!
Prohibited Prohibited
Outdoor unit or Power supply terminal
block or Remote controller terminal block
PCB
- 184 -
Connection pattern
Pattern A
Pattern B
Pattern C