Number Of Fail Signals Produced By The Weight Stack Motor Interface Board; Seat Motor Running Time; Seat Motor Test Cycles; Number Of Relay Switching Cycles To Move The Seat Motor Upward - Technogym BIOSTRENGTH LINE Service Maintenance Manual

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Press ENTER to continue.
9.5.5. N
UMBER OF FAIL SIGNALS PRODUCED BY THE WEIGHT STACK MOTOR
INTERFACE BOARD
The number of fails signals produced by the weight stack motor interface board.
Press ENTER to continue.
9.5.6. S
EAT MOTOR RUNNING TIME
This parameter does not appear for Abdominal Crunch and Lower Back.
This is the total number of hours for which the seat motor has been used.
Press ENTER to continue.
9.5.7. S
EAT MOTOR TEST CYCLES
This parameter does not appear for Abdominal Crunch and Lower Back.
The number of cycles performed by the seat motor during the test procedure described in paragraph
6.2. "Automatic components test".
Press ENTER to continue.
9.5.8. N
UMBER OF RELAY SWITCHING CYCLES TO MOVE THE SEAT MOTOR
UPWARD
This parameter does not appear for Abdominal Crunch and Lower Back.
The number of times the seat motor interface board relays have switched in order to move the motor
upward.
W E I G H T R E L A Y
C Y C L E S :
T O T A L F A I L
N :
M O T O R S E A T
H O U R S
M O T O R S E A T
C Y C L E S :
D O W N
X X X X X
W E I G H T
X
O N
X X : X X
X X X X X
Page 9.19