Panasonic KX-TDA30 Installation Manual page 101

Connecting the CS
1.
Connect the cable from a hybrid extension port, the DLC4/DLC8 card to the CS.
Modular
To a hybrid extension port,
or DLC4/DLC8 card
2.
Pass the cable through the groove of the CS (in any direction depending on your
convenience). Wrap the cable once around the ferrite core. Then close the case of the
ferrite core.
To a hybrid extension
port,or DLC4/DLC8 card
Note
If you need to open the ferrite core, use a flathead screwdriver to unlatch the case of the
ferrite core.
TO MAIN UNIT
/ PABX
2.7 Connection of DECT Portable Stations
Installation Manual 101