First Party Call Control Cti Connection - Panasonic KX-TDA30 Installation Manual

2.6 Connection of Extensions
2.6.5

First Party Call Control CTI Connection

CTI connection between a PC and a KX-T7633/T7636 DPT provides the first party call control.
The CTI connection is made via USB interface (version 1.1), and uses the CSTA Phase 3
protocol.
A USB Module (KX-T7601) must be connected to the KX-T7633/T7636 DPT.
Note
The operating system of the PC required for first party call control depends on your CTI
application software. For details, refer to the manual for your CTI application software.
USB Cable
USB Module
Note
Maximum length of the USB cable is 3 m.
84 Installation Manual
To PC
USB Port