Panasonic KX-TDA30 Installation Manual page 123

Registering the PS
The PS must be registered to the Hybrid IP-PBX by programming both the PS and Hybrid IP-
PBX before it can be used. A PT with multiline display (e.g., KX-T7636 6-line display) is
required for the Hybrid IP-PBX system programming.
Note
For details about system programming using a PT, refer to "2.3.2 PT Programming" and
"3.3 PT Programming" in the Feature Guide.
Entering the System Programming Mode
PT (Administrator Level)
PROGRAM
PT (User Level)
PROGRAM
PS
Press POWER
for 2 seconds.
If required
System Lock Password
Note
means default value through this section.
PS Registration
[690]
When the PS has not been registered yet
When registering the PS for the first time, it is possible to select the desired language for
the display. (You do not need to enter the PS system programming mode when registering
for the first time.)
System Password for Administrator—
#
for PT Programming
System Password for User—
for PT Programming
MENU
Select
S1
"PS PROGRAM".
4 digits
PS No.
01 to 28
ENTER
F2
Press S2 repeatedly
Press
to select the desired
POWER for
language.
2 seconds.
2.8 Connection of 2.4 GHz Portable Stations
= 1234
= 1234
SEL
Select
S1
"SYSTEM SETTING".
ENTR
System Setting Menu
S1
Extn. No.
1 to 4 digits
ENTER
F3
C.Tone
Press S3
for 2
seconds.
Programming No.
3 digits
Programming No.
3 digits
SEL
S1
To the PS
operation
END
below
Installation Manual 123