Panasonic KX-TDA30 Installation Manual page 124

2.8 Connection of 2.4 GHz Portable Stations
When the PS has already been registered to another Hybrid IP-PBX
One PS can be registered to a maximum of 4 different Hybrid IP-PBXs.
Setting the System Lock
When a system lock has been set, the system lock password will be required for PS system
setting.
Select
"SYSTEM LOCK".
SEL
S1
ENTR
S1
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong Hybrid IP-PBX, a PIN for PS registration can be set
to the Hybrid IP-PBX. Before registering the PS to the Hybrid IP-PBX, register the PIN set to
the Hybrid IP-PBX into the PS. By doing so, the PS will only be registered to the Hybrid IP-PBX
with the matching PIN.
Notes
• By default, the PIN for PS registration is "1234" for both the Hybrid IP-PBX and PS.
Therefore, the PS can be registered to the Hybrid IP-PBX without setting the PIN.
• The PIN for PS registration will only be used when registering the PS to the Hybrid
IP-PBX. Therefore, even when there is more than 1 Hybrid IP-PBX with the same PIN
near the PS, the PS will not be linked to a different Hybrid IP-PBX during normal
operation after registration.
Setting the PIN for Hybrid IP-PBX
[692]
Setting the PIN for PS
Select
"CHANGE PIN"
124 Installation Manual
Select
"REGISTRATION".
SEL CHNG
S1 S1
System Lock Password
ENABLE
4 digits
DISABLE
C.Tone
PIN for PS Registration
ENTER
SEL
PIN for PS Registration
S1
SEL
Choose
S1
"SYSTEM 1–4".
Choose
"Enable/Disable".
ENTR
S1
1 to 4 digits
1234
1 to 4 digits
1234
SEL
C.Tone
S1
System Lock Password
4 digits
END
ENTER
ENTR
C.Tone
S1