Making Wi-Fi Settings By Push Button Setup (Wps) - Epson XP-15000 Series User Manual

User's Guide
6. Press the OK button, and then enter the password.
Note:
❏ The password is case-sensitive.
❏ If you do not know the password, check if it is written on the label of the access point. If you are using the access point
with its default settings, use the password written on the label. The password may also be called a "Key", a
"Passphrase", and so on.
❏ If you do not know the password for the access point, see the documentation provided with the access point, or
contact the person who set it up.
7. When you have finished, select OK.
8. Check the settings, and then select Start Setup.
9. Select OK to finish.
Note:
If you fail to connect, load A4 size plain paper, and then select Print Check Report to print a connection report.
10. Press the button.
Related Information
"Entering Characters" on page 19
&
"Checking the Network Connection Status" on page 29
&
"When You Cannot Make Network Settings" on page 144
&

Making Wi-Fi Settings by Push Button Setup (WPS)

You can automatically set up a Wi-Fi network by pressing a button on the access point. If the following conditions
are met, you can set up by using this method.
❏ The access point is compatible with WPS (Wi-Fi Protected Setup).
❏ The current Wi-Fi connection was established by pressing a button on the access point.
Note:
If you cannot find the button or you are setting up using the software, see the documentation provided with the access point.
1. Select Wi-Fi on the home screen.
To select an item, move the focus to the item using the
2. Select Wi-Fi (Recommended).
If the printer has already been connected by Ethernet, select Router.
3. Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change Settings to
change the settings.
If the printer has already been connected by Ethernet, select Change to Wi-Fi connection., and then select Yes
after checking the message.
4. Select Push Button Setup (WPS).
Network Settings
u d l r
buttons, and then press the OK button.
25