Epson XP-15000 Series User Manual page 53

User's Guide
❏ Envelope
Load envelopes with the flap on the left side.
❏ Pre-punched paper
Load a single sheet of defined size plain paper with binding holes at the left or right. Adjust the print
position of your file to avoid printing over the holes.
4. Slide the edge guides to the edges of the paper.
5. Check the paper size and paper type settings displayed on the control panel. To use the settings, select OK. To
change the settings, select the item that you want to change, and then go to the next step.
To select an item, move the focus to the item using the
Note:
❏ By registering frequently used combinations of paper size and paper type as a favorite, you do not need to set them
each time. You can make paper settings just by selecting the registered preset.
To register a preset, select Favorite Paper Settings, press
paper type.
❏ The paper setting screen is not displayed if you have disabled Paper Configuration in the following menus. In this
situation, you cannot print from an iPhone or iPad using AirPrint.
Settings > Printer Settings > Paper Source Setting > Paper Configuration
Loading Paper
u d l r
buttons, and then press the OK button.
r
on the next screen and then specify the paper size and
53