Making Wi-Fi Settings By Push Button Setup (Wps); Related Information - Epson ET-M3180 Series User Manual

User's Guide
If the printer has already been connected by Ethernet, tap Change to Wi-Fi connection., and then select Yes
after checking the message.
4. Select Wi-Fi Setup Wizard.
5. Select the SSID for the wireless router.
Note:
❏ If the SSID you want to connect to is not displayed on the printer's control panel, tap Search Again to update the list.
If it is still not displayed, tap Enter Manually, and then enter the SSID directly.
❏ If you do not know the network name (SSID) check if the information is written on the label of the wireless router. If
you are using the wireless router with its default settings, use the SSID on the label. If you cannot find any
information, see the documentation provided with the wireless router.
6. Tap Enter Password, and then enter the password.
Note:
❏ The password is case-sensitive.
❏ If you do not know the password, check if the information is written on the label of the wireless router. On the label,
the password may be written "Network Key", "Wireless Password", and so on. If you are using the wireless router
with its default settings, use the password written on the label.
7. When you have finished, tap OK.
8. Check the settings, and then tap Start Setup.
9. Tap OK to finish.
Note:
If you fail to connect, load A4 size plain paper, and then select Print Check Report to print a connection report.
10. Close the Network Connection Settings screen.

Related Information

"Entering Characters" on page 20
&
"Checking the Network Connection Status" on page 38
&
"When You Cannot Make Network Settings" on page 205
&

Making Wi-Fi Settings by Push Button Setup (WPS)

You can automatically set up a Wi-Fi network by pressing a button on the wireless routor. If the following
conditions are met, you can set up by using this method.
❏ The wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏ The current Wi-Fi connection was established by pressing a button on the wireless router.
1. Tap on the home screen.
2. Select Wi-Fi (Recommended).
If the printer has already been connected by Ethernet, select Router.
Network Settings
34