Making Wi-Fi Settings Manually - Epson XP-15000 Series User Manual

User's Guide
After connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Related Information
"Making Wi-Fi Settings Manually" on page 24
&
"Making Wi-Fi Settings by Push Button Setup (WPS)" on page 25
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 26
&
"Making Wi-Fi Direct (Simple AP) Connection Settings" on page 27
&
"Making Advanced Network Settings" on page 28
&

Making Wi-Fi Settings Manually

You can manually set up the information necessary to connect to an access point from the printer's control panel.
To set up manually, you need the SSID and password for an access point.
Note:
If you are using an access point with its default settings, the SSID and password are on the label. If you do not know the SSID
and password, contact the person who set up the access point, or see the documentation provided with the access point.
1. Select Wi-Fi on the home screen.
To select an item, move the focus to the item using the
2. Select Wi-Fi (Recommended).
If the printer has already been connected by Ethernet, select Router.
3. Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change Settings to
change the settings.
If the printer has already been connected by Ethernet, select Change to Wi-Fi connection., and then select Yes
after checking the message.
4. Select Wi-Fi Setup Wizard.
5. Select the SSID for the access point.
Note:
❏ If the SSID you want to connect to is not displayed on the printer's control panel, press the
list. If it is still not displayed, press the
❏ If you do not know the SSID, check if it is written on the label of the access point. If you are using the access point
with its default settings, use the SSID written on the label.
Network Settings
u d l r
buttons, and then press the OK button.
button, and then enter the SSID directly.
24
button to update the