Printing Slows Down Dramatically During Continuous Printing; Cannot Cancel Printing From A Computer Running Mac Os X V10.6.8; Other Problems; Slight Electric Shock When Touching The Printer - Epson XP-15000 Series User Manual

User's Guide
Related Information
"Menu Options for Printer Settings" on page 113
&
"Guide to Windows Printer Driver" on page 121
&
"Guide to Mac OS Printer Driver" on page 124
&

Printing Slows Down Dramatically During Continuous Printing

Printing slows down to prevent the printer mechanism from overheating and being damaged. However, you can
continue printing. To return to normal printing speed, leave the printer idle for at least 30 minutes. Printing speed
does not return to normal if the power is off.

Cannot Cancel Printing from a Computer Running Mac OS X v10.6.8

If you want to stop printing from your computer, make the following settings.
Run Web Config, and then select Port9100 as the Top Priority Protocol setting in AirPrint Setup. Select System
Preferences from the
then add the printer again.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 118
&

Other Problems

Slight Electric Shock when Touching the Printer

If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.

Operation Sounds Are Loud

If operations sounds are too loud, enable Quiet Mode. Enabling this feature may reduce printing speed.
❏ Control Panel
From the home screen, select
❏ Windows
Enable Quiet Mode on the Main tab in the printer driver.
❏ Mac OS
Select System Preferences from the
select the printer. Click Options & Supplies > Options (or Driver). Select On as the Quiet Mode setting.
Solving Problems
menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the printer, and
, and then enable it.
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
156