Saving Power; Saving Power - Control Panel - Epson XP-15000 Series User Manual

User's Guide
4. Moisten a cotton swab with the water with a few drops of detergent so that it is not dripping water, and then
wipe the smeared part.
Important:
c
Wife off the smear gently. If you press the cotton swab too hard to the film, the springs of the film may be
dislocated and the printer may be damaged.
5. Use a new dry cotton swab to wipe the film.
Important:
c
Do not leave any fibers on the film.
Note:
To prevent the smear from spreading, frequently replace the cotton swab with a new one.
6. Repeat steps 4 and 5 until the film is not smeared.
7. Visually check that the film is not smeared.

Saving Power

The printer enters sleep mode or turns off automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will affect the product's energy efficiency. Please
consider the environment before making any change.

Saving Power - Control Panel

1. Select Settings on the home screen.
To select an item, move the focus to the item using the
2. Select Basic Settings.
3. Do one of the following.
❏ Select Sleep Timer or Power Off Settings > Power Off If Inactive or Power Off If Disconnected, and then
make settings.
Maintaining the Printer
u d l r
110
buttons, and then press the OK button.