Cooling/Heating Selector Cz-Rd1 Installation Instructions - Panasonic S-22KA1E5S Service Manual

11.3 Cooling/Heating Selector CZ-RD1 Installation Instructions

•
This module is used for cooling, heating and fanning operation settings.
Before installing the Cooling/Heating Selector, be sure to thoroughly read the "Precautions in terms of safety"
section in the installation instructions.
Precautions in
terms of safety
An explanation for the following safety marks/symbols is
provided and indicates the level of harm or damage
incurred from improper installation or disregarding the
safety precautions.
Warning
Caution
After installing the Cooling/Heating Selector, check that the module functions properly and also explain the
operation and cleaning procedures to the customer according to the instruction manual. Furthermore, ask the
customer to keep this installation instructions and the instruction manual in a safe place for later reference.
Ask the vendor or a qualified technician to perform the installation.
A faulty installation carried out by the customer may lead to electric shock or fire.
Be sure to carry out proper installation according to the installation instructions.
A faulty installation may lead to electric shock or fire.
The unit must be installed in accordance with applicable national and local regulations. Any electrical
work should only be carried out by qualified technician and use exclusive circuits without fail.
Presence of insufficient capacity in power circuit or imperfection in execution leads to electric shock,
fire, etc.
Be sure to always use the parts accessories or the specified parts for the connection and installation.
Failure to do so may lead to electric shock or fire.
Connect all wiring and cables securely with the specified cables or wires so that external force from
the cables does not transfer to the terminal connection section. An insecure or faulty connection may
lead to unit failure, excessive heat, or fire.
Be sure to always turn the power off before proceeding with wire and cable set up.
Failure to do so may lead to electric shock or fire.
Do not install near a place where there is risk of leaking flammable gas.
Failure to do so can lead to electric shock or fire.
Always Observe Safety
Precautions
This warning mark indicates that "There
exists a possibility the serious injury or
death may result".
This cautionary mark indicates that
"There only exists a possibility that
injury or damage to property may
result".
All important descriptions regarding safety are
listed here, and always observe them without fail.
An explanation for the following safety
symbols is provided and describes the type
of precautions that are required.
This symbol indicates something that is
PROHIBITED.
This symbol indicates something that is
REQUIRED.
Warning
Caution
98