Remote Control Operating Instructions; Wired Remote Control Cz-Rt1 - Panasonic S-22KA1E5S Service Manual

10. Remote Control Operating Instructions

10.1 Wired remote control
CZ-RT1
Name and function of each part
REMOTE
1
The OFF/ON button cannot be used.
LOCAL
All wired remote control buttons can be used.
2
Timer/time setting display
3
Check display
4
Fan Speed display
5
Operation mode selection display
FILTER RESET display
6
Appear after the cumulative running time reaches
approximately 2,500 hours of operation.
7
Temperature setting display (16°C – 31°C)
8
Airflow direction setting display
OFF/ON button
9
Used to start and stop the operation.
FAN SPEED button
10
Used to select the fan speed of HI, MED, LO or
AUTO.
MODE button
11
Used to select operation mode of AUTO, HEAT,
FAN, COOL or DRY.
TEMP (UP/DOWN) button
12
Use to select the desired temperature.
AIR SWING (AUTO/MANUAL) button
13
Not applicable for Hide Away models.
FILTER RESET button
14
Press to reset the "FILTER RESET" display after washing the filter.
TEST RUN button*
15
16 VENTILATION button*
ECONOMY button
17
Function not available for this model.
ODOUR WASH button
18
Function not available for this model.
CHECK button
19
Press this button if the check display is flashing.
TIMER/CLOCK SET button
20
Use to set the timer operation and the current time.
OPERATION Indicator
21
Light ON when the unit in operation.
NOTES
Buttons with * mark are not needed for normal operation. If one of these buttons is pressed by mistake, press the same button once again to
cancel the operation.
When the power resumed after power failure, by default the unit will restart automatically with all previous setting preserved by the memory
function under AUTO RESTART function.
1
21
20
19 18
84
2 3 4 5
17 16 15 14
6
7
8
9
10
11
12
13