Installing The Camera To The Mounting Plate - Bosch AUTODOME IP 4000 HD Installation Manual

Hide thumbs Also See for AUTODOME IP 4000 HD:
Table of Contents

Advertisement

AUTODOME IP 4000 HD
Figure 10.6: Attach mounting plate to wall mount
10.7

Installing the Camera to the Mounting Plate

1.
2.
Figure 10.7: Attach safety tether from wall mount to camera
3.
Bosch Security Systems
Route the cables from the ceiling out of the side of the mounting plate with the crescent-
shaped cut-out.
Attach the hook of the safety tether from the adapter to the bottom of the camera.
Connect ground wire from the ground lug on the adapter to the center terminal on the 3-
pin terminal block for 24 VAC at the bottom of the camera.
Installation Manual
Installing a Wall Mount and Camera | en
33
2015.11 | 1.1 |

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nez-4112-ppcw4Nez-4212-ppcw4Nez-4112-cpcw4

Table of Contents