Installing An In-Ceiling Camera In A Drywall Ceiling; Tools Required; Installation Requirements; Preparing The Ceiling For Installation - Bosch AUTODOME IP 4000 HD Installation Manual

AUTODOME IP 4000 HD
7

Installing an In-Ceiling Camera in a Drywall Ceiling

7.1

Tools Required

–
–
7.2

Installation Requirements

–
–
7.3

Preparing the Ceiling for Installation

1.
Figure 7.1: Mark hole with Template
2.
Figure 7.2: Cut hole in ceiling
3.
Figure 7.3: Cables from ceiling
7.4

Securing the Camera to the Ceiling

1.
Bosch Security Systems
Appropriate straight slot screwdriver
Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable)
The ceiling thickness ranges from 10 - 40 mm.
The ceiling can sustain at least eight (8) times the weight of the camera (1.81 kg (4 lb)): >
14.5 kg (32 lb).
Use the template to mark the hole in the ceiling for the camera.
> 15 kg
(33 lb)
Cut the hole in the ceiling with a drywall utility saw or jig saw.
160 mm
(6.3 in.)
Pull the cables (24 VAC, CAT 5/CAT6, alarm and/or audio as needed) through the hole in
the ceiling.
Connect the cables from the ceiling to the cables on the camera. Refer to the chapter
Connection for more information.
Installing an In-Ceiling Camera in a Drywall Ceiling | en
Installation Manual
17
2015.11 | 1.1 |